Flexible Cementious Acrylic polymer based membrane elongation of 50%.Before application all concrete defects and construction joint should be treated with high strength mortar and grouting. It should be protected with Plaster. If it’s STP or chemical reacted water recommend to apply Coal tar epoxy over the plastered surface.

Crystalline application works as integral waterproofing and create a crystal in to the concrete and fill the voids in the concrete. The concreting has to be very good when used as standalone system along with suitable water stops/Crystalline mortar for construction joints, Tie rods/Concrete defects has to be treated with Crystalline mortar/High strength mortar  after necessary grouting for concrete defects. Curing is the very important part of crystalline system. Protection layer is not required. If it’s STP or chemical reacted water recommend to apply Coal tar epoxy over the surface after sufficent curing. Application warranty is provided for 10 Years. 

            Consumption of Crystalline slurry @ 1.4Kg/Sqm.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and most suitable for all locations and very easy application in a building. High chemical resistant PU was suggested for STP and waste water tanks. Protection layer is not required according to the selection of product.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and application is not easy in tanks. Applied with skilled and applicators and application should be done in spray machine for most of the product from the manufactures. It should be protected after application of membrane.